Resilmount A237R
Resilmount A237R Sound-Isolation Clips drastically reduce structure-borne noise, creating quieter spaces in a few simple steps. Easy to install these compact clips offer excellent acoustic performance for any sound-sensitive project, providing peace without compromising design or budget.
- Superior Noise Reduction: Structure-borne vibration and acoustic drywall isolation prevent sound transfer across framing for enhanced STC performance.
- Compact & Easy Installation: Fits 25-gauge hat/furring channel and snaps easily into place — streamlined for fast, painless installations.
- UL-Tested & Trusted: Third-party certified for use in fire-rated assemblies. Meets industry standards for safety and performance.
- Budget-Friendly Upgrade: Delivers significant sound isolation improvements at a small, cost-effective addition to any project.
Online orders up to 4,999 pieces. For anything larger, call (415) 864-4440 and we'll price the project with you.
A237R Specifications
- Width
- 1 7/16 in (1.375 in)
- Height
- 3 1/4 in (3.25 in)
- Depth
- 1 1/16 in (1.125 in)
- Weight
- 0.25 lb
- Max spacing between clips
- 48 in on center
- Max load (dead weight)
- 55 lb
- Isolation element
- Thermoplastic rubber sound cells
- UL rating
- Listed in fire-rated assemblies
Hat channel specs
- Minimum gauge
- 25 gauge (hemmed edge)
- Depth
- 7/8 in or 1 1/2 in
- Width — top
- 1 1/4 in
- Width — bottom
- 2 1/2 in max
- Fasteners (wood)
- #8 × 2 1/2" coarse thread
- Fasteners (steel)
- #8/10/12 × 1 5/8" Type S self-tapping
- Fasteners (concrete)
- 3/16" × 2 1/4" Tapcon or equal
A237R Project Calculator
Enter your surface square footage. We'll return a clip, channel, and screw count for your project — calculations run on our servers so estimates stay accurate as our field data improves.
Adds MLV over Good for a denser limp-mass layer.
Estimated STC — Planning use only
This value is an approximate assembly projection, not a project-specific assessment, certified laboratory test result or performance guarantee. Actual performance varies with the complete assembly, installation, flanking paths, penetrations and site conditions.
Estimates follow the manufacturer's standard clip and hat-channel layout for walls and ceilings. A 10% coverage buffer is recommended to cover cuts and re-work.
Estimated STC Gauge
Compare how the A237R performs across assembly tiers. Select an assembly below to see the estimated STC score.
Clips + hat channel + double 5/8" Type X drywall with Green Glue between layers, R13 insulation.
Estimated STC — Planning use only
This value is an approximate assembly projection, not a project-specific assessment, certified laboratory test result or performance guarantee. Actual performance varies with the complete assembly, installation, flanking paths, penetrations and site conditions.
- STC 30-39: Loud speech clearly audible next room.
- STC 40-49: Loud speech muffled — normal residential wall.
- STC 50-59: Loud speech barely audible; suitable for offices & multi-family.
- STC 60+: Approaches studio-grade isolation.
How A237R compares
| Model | Primary Use | Hat Channel | Typical Layout | Isolation Element |
|---|---|---|---|---|
| A237Rthis | Resilient sound clip for walls & ceilings | 7/8" or 1 1/2" | ≤24" o.c. hat · ≤48" o.c. clip spacing | Thermoplastic rubber sound cells |
| A237 | Direct furring bracket (rigid) | 7/8" or 1 1/2" | ≤24" o.c. hat · ≤48" o.c. clip spacing | None (rigid mount) |
Applicable Assemblies
See where the A237R fits — from budget baseline to studio-grade isolation.
Best — Clips + Double Drywall + Green Glue
R13 insulation · 7/8" hat channel · 5/8" Type X drywall · Green Glue · 5/8" Type X drywall.
Better — Clips + Single Drywall
R13 insulation · 7/8" hat channel · single 5/8" Type X drywall each side.
Good — Standard Assembly (no clips)
Baseline wall assembly, single 5/8" Type X drywall each side of R13 insulation.
