PAC International Clips

PAC International RSIC-V

The PAC International RSIC-V is a resilient furring-channel mount that clamps to 7/8" hat channel to keep isolation intact at blocking, fixtures, trims, and service penetrations. It extends the acoustic break of a resilient clip system into every accessory the finished wall needs.

  • Isolation at Accessory Points: Preserves decoupling where blocking, trim, and service penetrations would otherwise re-couple the assembly to the frame.
  • Channel-Clamp Attachment: Clamps directly to 7/8" hat channel without piercing the resilient assembly — installs without breaking the acoustic plane.
  • Low-Profile Body: Sits flush against the channel so drywall goes on straight and reveal lines stay consistent.
  • Zinc-Plated Steel: Formed steel body with plated finish resists corrosion in bath, kitchen, and mechanical-room applications.
$2.50
/ clip

Online orders up to 4,999 pieces. For anything larger, call (415) 864-4440 and we'll price the project with you.

Volume pricing

$2.50 per clip. Order 250+ clips and pay $2.25 per clip — an extra $0.25 off per clip for each additional 250 clips, down to a $1.75 per clip floor.

Discounts apply automatically in the cart and count boxes and cases toward the total.

Authorized PAC International DealerUL-compatible assembliesLocal pickup: SF, San Leandro, LA
Product Specs

RSIC-V Specifications

Width
2 in
Length
3 1/2 in
Depth
1 in
Max load (per clip)
25 lb accessory load
Isolation element
Attaches to resilient hat-channel system
Compatible channel
7/8 in 25-gauge hat channel
Companion Component

Hat channel specs

Minimum gauge
25 gauge (hemmed edge)
Depth
7/8 in or 1 1/2 in
Width — top
1 1/4 in
Width — bottom
2 1/2 in max
Fasteners (wood)
#8 × 2 1/2" coarse thread
Fasteners (steel)
#8/10/12 × 1 5/8" Type S self-tapping
Quantity Calculator

RSIC-V Project Calculator

Enter your surface square footage. We'll return a clip, channel, and screw count for your project — calculations run on our servers so estimates stay accurate as our field data improves.

Estimated STC
57

Adds MLV over Good for a denser limp-mass layer.

Assembly datasheets
Good Estimated STC 52Better Estimated STC 57Best Estimated STC 65

Estimated STC — Planning use only

This value is an approximate assembly projection, not a project-specific assessment, certified laboratory test result or performance guarantee. Actual performance varies with the complete assembly, installation, flanking paths, penetrations and site conditions.

Estimates follow the manufacturer's standard clip and hat-channel layout for walls and ceilings. A 10% coverage buffer is recommended to cover cuts and re-work.

Estimated Materials
—Clips needed
Hat/furring channels—
Screws for clips—
Indicative only. Final quantities vary by framing spacing and access.
Sound Performance

Estimated STC Gauge

Compare how the RSIC-V performs across assembly tiers. Select an assembly below to see the estimated STC score.

RSIC-V + hat channel + MLV + double 5/8" drywall with Green Glue between layers, insulated stud wall.

Estimated STC56
080

Estimated STC — Planning use only

This value is an approximate assembly projection, not a project-specific assessment, certified laboratory test result or performance guarantee. Actual performance varies with the complete assembly, installation, flanking paths, penetrations and site conditions.

What the score means
  • STC 30-39: Loud speech clearly audible next room.
  • STC 40-49: Loud speech muffled — normal residential wall.
  • STC 50-59: Loud speech barely audible; suitable for offices & multi-family.
  • STC 60+: Approaches studio-grade isolation.
Product Comparison

How RSIC-V compares

ModelPrimary UseHat ChannelTypical LayoutIsolation Element
RSIC-VthisFurring-channel mount for accessories & penetrations7/8" 25-ga≤24" o.c. channel · ≤48" o.c. clipsResilient rubber / elastomer
RSIC-1Baseline resilient isolation clip7/8" 25-ga≤24" o.c. channel · ≤48" o.c. clipsMolded rubber isolator
Resilmount A237RResilient sound isolation clip (Resilmount)7/8" or 1 1/2" 25-ga≤24" o.c. channel · ≤48" o.c. clipsThermoplastic rubber sound cells
Downloads

Data Sheets & Guides

Resilmount Clips — Data Sheets Library
FAQ

RSIC-V — Common Questions

Maintain a 1/4" perimeter gap between drywall and adjoining surfaces (floor, ceiling, intersecting walls), then seal with acoustic sealant on both faces. Never let drywall, trim, or fasteners contact the framing directly — that shorts out the resilient path.