Wall AssemblyPAC International Clips

RC-1 BOOST adds a resilient isolator at each RC-1-channel-to-framing screw connection in new wall assemblies, so the channel fastener is isolated instead of rigid.

RSIC-U is a resilient wall-plate anchor: it isolates the wood plate or steel track from the floor structure — and from overhead structure where detailed — so vibration cannot flank through a rigid framing connection. It does not carry furring channel.

RSIC-1 RETRO is a purpose-built retrofit clip that adds resilient isolation to existing drywall assemblies with minimal demolition.

RSIC-1 BACKER is a heavy-duty resilient backing mount that carries a steel backing track so cabinets, TVs, grab bars and handrails attach to a sound-isolated wall without a rigid path to the studs.

RSIC-WFI is a wall-frame isolation system — molded rubber isolators plus a continuous 1/2 in RSIC-FGP pad — that separates a wall's bottom and top framing from the adjoining structure.

RSIC-2 high-capacity resilient clip carries larger drywall loads while preserving the isolation characteristics of the RSIC family.

RSIC-1 EXT04 adjustable 4" extension isolator offsets the clip from framing to bypass obstructions while maintaining full acoustic isolation on wall assemblies.

RSIC-1 Edge is an exception clip used with standard RSIC-1 clips: its down-facing L bracket supports the furring channel where a wall has no framing face for a normal clip. 18 lb per isolator.