Ceiling AssemblyPAC International Clips

RC-1 BOOST adds a resilient isolator at each RC-1-channel-to-framing screw connection in new ceiling assemblies, so the channel fastener is isolated instead of rigid.

RSIC-1 RETRO adds resilient isolation to existing ceiling drywall with minimal demolition — the purpose-built retrofit clip for occupied-space upgrades.

RSIC-1 EXT04 adjustable 4" extension isolator offsets the clip from framing to bypass obstructions while maintaining ceiling height and full acoustic isolation.

RSIC-1 Low Profile is a ceiling-only resilient clip that side-mounts to the joist so the 7/8 in furring channel recesses into the cavity — as little as 1/2 in of drop, 36 lb per isolator.

RSIC-1 Edge is an exception clip used with standard RSIC-1 clips: it carries the furring channel at run ends and ceiling perimeters where no joist is available. 18 lb per isolator.

RSIC-SI-FF-BRC EZ direct-mount full-frame spring and rubber ceiling isolator — EZ clip holds 1-1/2 in CRC below, with factory-calibrated capacities to 80 lb.

RSIC-SI-FF-BRW direct-mount full-frame spring and rubber ceiling isolator — lower hanger wire to a suspended drywall grid, with factory-calibrated capacities to 80 lb.

RSIC-SI-FF-WRC EZ ceiling-only wire-hung full-frame spring and rubber isolator whose EZ clip holds and is screwed to a 1-1/2 in 16 ga CRC carrier.

RSIC-SI-FF-WRW ceiling-only wire-hung full-frame spring and rubber isolator that holds hanger wire below for a suspended drywall grid ceiling.

RSIC-SI-CRC2 LP ceiling-only low-profile spring hanger for concrete, supporting two parallel 1-1/2 in cold rolled carrier channels in about a 3-7/8 in cavity.

RSIC-SI-X ADM Mini Drop-In ceiling-only spring isolator that threads into a 1/4 in mini drop-in anchor in concrete and carries one 7/8 in furring channel.

RSIC-SI-X ADM Multi-Clip ceiling-only adjustable spring mount fastened direct to concrete, wood or steel, carrying one 7/8 in furring channel.

RSIC-SI-X 1.5 CRC ceiling-only spring-and-rubber clip snaps onto 1 1/2" cold-rolled channel and isolates 7/8" furring channel at each crossing, max 16 x 48 in o.c.

RSIC-WHI ceiling-only wire hanger isolator installs inline in minimum 12-ga annealed hanger wire to decouple a suspended drywall grid or CRC ceiling from the structure.

RSIC-SI-WHI ceiling-only pre-calibrated spring hanger mounts to the side of the framing; hanger wire ties to its bottom loop and carries a 1.5 in 16 ga CRC carrier system or an approved drywall grid.